Quality Assurance

Wood tenoning and milling process/

(Germany Power WEINIG Unicontrol6 door and window processing center)

Germany's power UC6 CNC machining center, high machining accuracy, complete computer control system, high-precision German "blue flag" integrated tool system, after a clamping positioning, complete end and vertical all processing, processing accuracy is far higher than any other processing mode.
Advanced closed-loop workpiece circulation mode, end processing and vertical processing do not interfere with each other, better use of equipment, improve production efficiency.
From the cutting principle, intermittent high-speed cutting, with high-precision "blue flag" tool, so that the workpiece in the cutting surface is more smooth, smooth, conducive to the surface of the workpiece paint treatment and the whole window of the aesthetic effect.
 

Wood tenoning and milling process/

(Italian SCM WINDOR20-Scattered Single Artifact)

1. Large number of tools: multiple sets of wooden window tools are installed on the same tool shaft, 620mm long vertical milling shaft. The whole set of wooden window tools are installed on the machine without changing the tool. Greatly improve the production efficiency of scattered orders.

2. Digital positioning: multiple sets of tools are installed on the same tool axis, and the vertical position is controlled by CNC, and the tools are accurately positioned to ensure the machining accuracy of the workpiece.

3, process control: set by CNC processing program, automatic tool change processing. The operator can process and operate only according to the name number of the window piece, and does not need to be skilled in the window structure.

The range of processing parameters is large, and smaller workpieces can be processed than UC6. Because of its high machining accuracy and minimal machining error, the machining quality is stable and reliable. And effectively ensure the air tightness, water tightness and other performance indicators of our aluminum clad wood windows.

-Italian SCM WINDOR20 has a large amount of tool loading, numerical control of the tool shaft, low-speed tool change difficulty and obvious frequency advantages, which can significantly reduce the dependence on operator technology. End milling and vertical milling can be operated separately, docking with German KLAES software, and the production efficiency is extremely high.

Wood tenoning and milling process/

(BIESSE ROVER C6 Wood Five-axis Machining Center, Bias, Italy)

With the German KLAES door and window software intelligent machine, processing program directly imported, to ensure that the processing process without any misoperation. Equipped with German blue flag cutting tool, the rotating speed is 18000 rpm, and the machining accuracy error is controlled within 0.2mm. The equipment comes with 32 tool positions, automatic tool change, and can process 5 surfaces at the same time.
One-time positioning zero error to achieve seamless docking of unit frames is a necessary high-precision processing equipment for aluminum-clad wood sun room processing.
ROVERC is the best production helper for all door and window components. All shapes and sizes can be completed in one go, external, internal contours, tongues, machining accessories, and shaping irregular frames.
The BIESSEROVER processing center is specially designed for the production of high-end doors and windows. ROVERC has given it a very creative high-tech processing method and a solid body design to ensure that the equipment can always guarantee the quality of its finished products and the reliability of production under any conditions.

Wood Framing Process Germany/

(HESS 2500X3050 frame closing machine)

1. The middle horizontal and middle vertical lines shall be jointed by internal mortise and tenon process. The round bar dowel hole before the frame is positioned on the machine at one time. Ensure its machining accuracy. The position error and depth error are controlled within 1mm.
2. When the frame is closed, the middle horizontal and middle vertical of each workpiece and the frame edge shall be connected with the inner tenon and pressed into place at one time.
3. Compared with the traditional manual upper middle horizontal, the one-time pressing of the machine greatly improves the quality of the product and the work efficiency. This processing method eliminates the external damage to the workpiece and effectively increases the strength of the workpiece.
The weather resistance of the product in the later stage is increased. At the same time, it also improves the accuracy of the workpiece and reduces the inaccuracy of secondary processing and manual upper and middle horizontal and middle vertical.

Wood Blats Assembly Process/

(German Yelu "V" saw)

1. This process uses Yale "V" type saw in Germany. This saw is controlled by numerical control, which can transmit the data of measuring ruler to the processing system of this saw in a straight line.
2. The tool used for workpiece processing is carbide circular saw blade. It has the characteristics of strong cutting force, fast cutting speed and neat cutting surface without burr. The basic process of using this saw is a measuring ruler to transmit data, a sawing net size and a set of wood bindings.
A total of four parts, easy to operate, high precision, high efficiency. Completely avoid the traditional process in the angle is not accurate, the length is not accurate operation of the complex progress of the shortcomings.